Whorl milling is machined
- Time:
- Click:101
- source:BERO CNC Machining
Milling of economy advantage whorl discharged the necessity that uses a large number of different type tap: Process all data; Treatment has the aleatoric whorl diameter of same pitch; In the operation in blind aperture and via; Can machine random to cooperate, tolerancepublic errand or the whorl that the position asks. With traditional HSS(high-speed steel) tap photograph is compared, use milling of hard alloy whorl to be able to improve productivity: Higher cutting rate; More cutting blade and taller feed speed. Use a kind of cutting tool to have two kinds of operations! (Whorl and type pouring wine cup 12 change knife time fewerly with 32) ; Fewer handling time; Reduce cutting tool cost. Contain can change the whorl milling cutter of bit has additional profit. Can be in same bit changes quickly on knife clip, in order to machine the whorl of different type (M, MF, G, Rp) . Use a few razor blade to be able to cover the treatment of almost all and common thread only. Tatty razor blade can change quickly, in order to reduce machine tool machine down time. 2.
What the advantage of safe respect arises from beginning to end as a result of treatment is short cut bits (it is such) to any material, because this is nonexistent,cut bits to deal with the problem of the respect. To whorl milling treatment, measure of nonexistent treatment whorl passes big question. Whorl dimension is by treatment loop pilot. Cutting tool damaged won't bring about a spare parts to become invalid - the part of cutting tool damaged is OK easily from the purify in the spare parts. To processing data especially hard, compare with tap or figuration law photograph, use security of whorl milling means to want to be gotten high much. 3.
The advantage whorl milling cutter of technical respect is done not have actually " oriented awl " , such, can fall to reach thread machining in the circumstance that makes sure contented treatment asks the bottom of aperture. Can be in almost the material of any types (pliable but strong, high strenth, quench sclerosis) in be without whorl of problem ground milling. Those cannot use traditional method (figuration of whorl tap, whorl) the material of treatment can undertake machining with whorl milling cutter. Use whorl milling cutter, can realize any tolerancepublic errand positions. The sort of is in tap respect is differred to obtain special or unusual Xiaogong and need takes president time " wait " phenomenon, be avoided completely in respect of whorl milling cutter. CNC Milling CNC Machining