About a few proposals that Injection Mold Tooling installs

5-1.

8 times. The word that twists inadequacy slips easily tooth, and the risk that the mould drops. Affirm the work staff that produces a need, stock, tool, file, equipment subsidiary engine all ready. 2, the methodological condole model of condole model not when the level, the antrum of mould around model of installation can have paragraph of difference of different Cheng to appear, for accurate to production product, can appear homocentric degree undesirable, paragraph difference is undesirable, tooth form precision is undesirable, the distance is undesirable wait for a phenomenon. When installing a mould, we need to note this problem surely, go in when condole model when closing to be able to urge minor position in one's hand, stop to combine a model. Become loose with screw rings, the model is previously fiducial (because before the model has fixed position to encircle fixed) , part of the model after watching, with before when modular standard is optimal, be identical of mould antrum position, continue to add up to a model to come finish, but it is better to do not start high pressure. (Upper mould adds up to a model not to have maximum pressure first certainly first, wait for affirm it is normal to combine a model just can remove high-pressured) . 3, the methodological low temperature that makes screw namely the mould with 50 degrees of the following lukewarm models, when can adding up to a model to start to high pressure, around model diagonal screws screw, 8 screw are twisted can, when model of 50 degrees of above is lukewarm, the model is lukewarm before arriving, screw is not twisted too close, need a standard lukewarm after arriving again high pressure starts, diagonal screws screw. Mould material bilges along with the elevatory meeting splash of temperature, bulk increases. Modular Wen Gaoshi is more apparent, if be in,screw screw, have certain effect to mould life and its mould precision. 4, the use that adds capable person is become mould ply is insufficient, indispensible add outfit pattern plate. When the model lukewarm taller when, between machine board and mould thermal insulation board of best mount. No matter be pattern plate or it is thermal insulation board, its flatness must as far as possible small. If its flatness is bigger when, criterion mould around model is not parallel, the difference exists euqally after high pressure closes, affect product quality thereby. When the model lukewarm after arriving at set to be worth, examination mould is actual temperature, having a model thick adjust. CNC Milling CNC Machining